SSD1327

简介

Advance Information
 
128 x 128, 16 Gray Scale Dot Matrix

OLED/PLED Segment/Common Driver with Controller


CMOS

 

SSD1327 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 128 commons. This IC is designed for Common Cathode type OLED/PLED panel.


SSD1327 displays data directly from its internal 128 x 128 x 4 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through the hardware selectable I2C Interface, 6800-/8080-series compatible Parallel Interface or Serial Peripheral Interface.
 

Contact our sales representative for more information:

Features

  • Resolution: 128 x 128 matrix panel
  • Power supply

– VCC= 8V – 18V       (Panel driving power supply)

– VCI= 1.65V – 3.5V   (MCU interface logic level & low voltage power supply)

– VDD= 1.65V – 2.6V  (Core VDD power supply, details refer to Table 2-1)

 

Table 2-1 VCI and VDD range

 

VCI VDD Remarks
1.65 V ~ 2.6V 1.65V ~ 2.6V VDD should be tied to VCI and supplied by external power source
2.6V ~ 3.5V 2.4V ~ 2.6V VDD is regulated from VCI

 

 

  • For matrix display

– Segment maximum source current: 300µA

– Common maximum sink current: 40mA

– 256 step contrast brightness current control

  • Embedded 128 x 128 x 4 bit SRAM display buffer
  • 16 gray scale
  • Pin selectable MCU Interfaces

– 8-bit 6800/8080-series parallel interface

– 3/4-wire Serial Peripheral Interface

– I2C Interface

  • Screen saving continuous scrolling function in both horizontal and vertical direction
  • Programmable Frame Rate
  • Programmable Multiplexing Ratio
  • Row Re-mapping and Column Re-mapping
  • On-chip Oscillator
  • Power On Reset (POR)
  • Chip layout for COG, COF
  • Wide range of operating temperature: -40ºC to 85ºC
     

Ordering Information

Ordering Part No. SSD1327ZB
Package COG
Ordering Part No. Package
SSD1327ZB COG